Dakota VIN Registry
The database currently contains the following lines for 1991 trucks
Dakota VIN Registry
The database currently contains the following lines for 1991 trucks
 Model years | |
4x2  | |
| 4x4 | |
| Hide the list of all trucks produced in 1991 | |
| 1991 4x2 ClubCab with a 3.9l_V8 engine, built in the Warren,MI plant; sequence number unknown | |
| Mileage | Problem |
|---|---|
| unknown | I recently purchased a truck which makes a roaring noise above 65mph. It has been in various shops for quite some time and no one can figure it out. Things which have been checked/replaced include: Harmonic balancer Torque converter The bushing at the rear of the transmission(whatever it is) Both driveshaft yokes Driveshaft(actually replaced twice) Differential Rear axle bearings All tires and alignment Motor & transmission mounts The truck doesn't do this on a lift with the driveshaft out, but does when it is put back in. Is it possible that some slight imperfection in the rear pinion or drive shaft could have gotten past them? Any input would be GREATLY appreciated. Also, why won't chrystler let you talk to anyone but a dealer or a customer service rep who only tells you to talk to a dealer? I have a phone # for Technical Support, but I need a dealer code. |
| This truck is owned by Andy Moubray (amoubray@iswt.com) | |
| 1991 4x4 RegularCab with a 5.2l_V8 engine, built in the Warren,MI plant; sequence number 280884 | |
| Mileage | Problem |
|---|---|
| 30000 | miles-replaced upper & lower ball joints (warranty) |
| 40000 | had to replace front rotors due to rust pitting (not covered) |
| 65000 | automatic transmission failed, dealer installed rebuilt unit & new torque converter (warranty) |
| 86000 | short in A/C system,compressor not kicking in, haven't repaired yet. |
| This truck is owned by Scott Sanford (brisk1@altavista.com) | |
Back to the DML Home Page -
Back to the Dakota VIN Registry Home 
Jon N. Steiger / jon@dakota-truck.net